5 Simple Steps to Install an SD Card for Your Litokam Camera
How-to

5 Simple Steps to Install an SD Card for Your Litokam Camera

Looking to add more storage to your Litokam P1 or C1 camera? Installing an SD card is a quick and easy way to ensure your camera can save local video recordings without relying only on cloud storage. Here's a step-by-step guide to help you get everything set up smoothly.

 

Contents

  • How to insert the micro SD card for your indoor camera?
  • How to Check if the SD Card is Full?

 

How to insert the micro SD card for your indoor camera?

 

Step 1: Locate the micro SD card slot

  • For the P1 camera: Gently tilt the camera lens upward until you see the micro SD card slot at the bottom of the lens.
  • For the C1 camera: You’ll find the micro SD card slot on the right side of the camera, which is easy to access.

 

 

Step 2: Insert the micro SD card

  • Insert the SD card in with the metal contacts facing up. You should feel or hear a little "click" once it’s properly seated.
  • Notes: Do not insert or remove the SD card while the camera is powered on to avoid data loss or damage to the device.
  • A quick tip: Not sure which SD card to use? Check out our handy guide for recommendations: How to Choose the Right SD Card?

 

 

Step 3: Add the device in the littlelf smart APP

  • Open the littlelf smart APP and follow the instructions to add your camera device. Ensure the camera connects successfully before proceeding.

 

 

Step 4: Format the micro SD card

  • After successfully adding the device, the app will prompt you to format the SD card. Click "Confirm" to begin formatting, which will ensure the SD card is compatible with the camera.

     

    Step 5: Turn on recording and select the recording mode

    • Once formatting is complete, go to the settings and enable the recording function. Choose the appropriate recording mode based on your needs, such as continuous recording or event-based recording.
    • Tip: Read our in-depth guide for more details on the differences between recording modes.

     

    How to Check if the SD Card is Full?

    1. Open the camera’s settings page.
    2. Scroll down to find Storage Settings.
    3. You can check the storage capacity here and see if you're running low on space.

     

    By following these simple steps, you can easily install an SD card in your Litokam P1 or C1 camera and activate local storage. Once the SD card is installed, your camera will automatically start recording video. Be sure to regularly check the storage status to avoid running out of space. If you need more storage space or want to back up important recordings, consider upgrading to Litokam’s Cloud Storage Service, allowing you to access your videos anytime, anywhere.

    Tags:
    Share: