![How to Pair Your Litokam Camera with Littlelf Smart App by Using QR Code and Bluetooth](http://litokam.com/cdn/shop/articles/C1QRCODE-1_CP.png?v=1706612052&width=1100)
How to Pair Your Litokam Camera with Littlelf Smart App by Using QR Code and Bluetooth
This blog will guide you through the process of pairing your Litokam Camera with the Littlelf Smart App using both a QR code and Bluetooth, along with providing helpful tips to ensure a smooth setup. Let’s dive in and enhance your home’s security with a seamless setup experience!
Content Table
- Pair by QR Code
- Pair by Bluetooth
- Pair Mode Correction
- Watch Full Video on YouTube
Pair by QR Code
QR code pairing is a traditional and straightforward method of connecting smart devices to mobile applications. This quick and secure process involves scanning a QR code displayed on your smartphone, streamlining the setup, and reducing potential errors associated with manual configurations. Here’s how:
Preparation Before Setup
Before you begin, make sure you have the following things done.
- Please download the "Littlelf Smart" app on your smartphone.
- Confirm the network frequency the camera supports and connect your phone to the appropriate network (2.4 GHz or 5 GHz).
- Power on the camera.
*QR code pairing mode is now available for the following models: P1&P1 Pro(also known as LF-P1t & LF-P1t Pro), C1&C1 Pro (also known as LF-C1t & LF-C1t Pro), S1, M1, A1, B1 and D1.
Steps to Pair
- Open the app and tap the "+" or "Add Device" on the homepage.
- Choose the type of camera you have purchased, e.g., a 2.4G Camera or a 5G Camera.
- Refer to the label on the device and select the camera model.
- Check the status of the camera's indicator light, then click "Next."
- Enter your WiFi password and proceed to the next step.
- Face the QR code on your phone towards the camera, maintaining a distance of 15-20cm, until you hear "Scan QR code successfully."
- Wait for the camera to configure the network automatically and then click "Done."
- Your camera is now set up and ready for use!
Video guide for QR Code Pairing on YouTube
Reminders:
- Camera's red light/green-blue is steady.
- Indicator light briefly flashes and then turns off.
- Indicator light is purple or yellow.
If you encounter any of the above situations, refer to the solutions for different indicator light statuses or click "Live Chat" to contact us.
Additional Notes:
- Ensure you're connected to the network frequency supported by the camera.
- Enable your phone's location permission to detect nearby WiFi or manually enter the correct WiFi name.
- If the QR code scanning fails:
- Maintain a distance of 15-20cm between the camera and the phone screen.
- Gradually adjust the distance between the phone screen and the camera.
- Slightly alter the angle of the phone screen to avoid glare.
- Make sure the QR code is clear and not distorted.
- If your phone screen is too small or damaged, consider using another device.
- Check if the camera is in network setup mode; if unsure, click [here] to check.
- Ensure the app has been granted all necessary permissions; if uncertain, click [here] to check.
- If, after the above checks, the camera still fails to configure or the indicator light displays an unusual status (such as steady red/green-blue light, briefly flashing and then turning off, showing purple or yellow, etc.), refer to solutions for different indicator light statuses or contact us immediately via "Live Chat " or submit a ticket>>>
Pair by Bluetooth
Bluetooth pairing represents a modern and convenient method for connecting devices ensuring that users can easily connect their devices without compromising security.
*QR code pairing mode is currently available ONLY for the following models: B1 and D1.
![](https://cdn.shopify.com/s/files/1/0724/5253/8651/files/D1_240x240.jpg?v=1698918162)
![](https://cdn.shopify.com/s/files/1/0724/5253/8651/files/B1_240x240.jpg?v=1698918178)
Steps to Pair
- Launch the "Littlelf Smart" app and permit it to use Bluetooth.
- Tap the "Add" button in the dialogue box. If not prompted, select the "+" or "Add device" on the homepage. The app will automatically search for the camera; once located, tap the "Add" button to include it.
- Enter your WiFi password and proceed.
- Wait for the camera to connect to the network automatically, then tap "Done".
- You're now all set to use the camera!
Additional Notes:
- Make sure your phone's Bluetooth is switched on and authorized for the "Littlelf Smart" app, and confirm that the camera supports the specific network frequency and the phone is connected to the 2.4 GHz network. If you're unsure of how to do this, click [here] to view the "APP Authorization" guide.
- Please enable location permissions on your phone to identify nearby WiFi names related to the camera. If you're hesitant to grant this permission, manually enter the WiFi name and ensure its accuracy.
- During the setup process, keep the phone and the camera within a 1-meter distance and verify the correctness of the WiFi username and password.
- Examine whether the camera's indicator light is in the network setup mode. If unclear about its meaning, click [here] to see.
- Ensure that all necessary permissions are granted for the app. Click [here] to view a detailed permissions list.
- If, after the above checks, the camera still fails to configure or the indicator light displays an abnormal state (like continuous red/green-blue light, brief flashing followed by going dark, displaying purple or yellow, etc.), click here to see the solutions corresponding to various indicator light statuses or please contact us immediately via "Live Chat".
Pair Mode Correction
We understand that you might be upset if something goes wrong. Here we provide you with a checklist and solution when the camera isn't in the network setup mode.
- Hold the "RESET" button for 5 seconds, until you hear "Reset successfully" or the "Dong-Dong-Dong" sound, indicating the camera has been successfully reset.
- The camera's indicator light will flash as per the following table:
Camera Type |
Model Name |
Indicator Status |
Fixed Cam |
LF-C1t |
Red light blinks |
LF-C1t Pro |
Red light blinks |
|
PTZ Cam |
Cam M1 |
White light blinks |
Cam S1 |
White light blinks |
|
LF-P1t |
Red light blinks |
|
Cam S1 Pro |
White light blinks |
|
Cam M1 Pro |
White light blinks |
|
LF-P1t Pro |
Red light blinks |
|
Battery Cam |
B1 |
Red light blinks |
Doorbell Cam |
D1 |
Blue light Slowly blinks |
Conclusion
By following the outlined steps and tips, you can ensure a smooth setup process and enhance the security and convenience of your home. Whether you are tech-savvy or new to smart home devices, this guide is designed to help you navigate the pairing process with ease. If you have any questions or encounter any issues during the pairing process, please do not hesitate to reach out to our customer support team. You can send your inquiries via email to our dedicated customer service address, and we will be more than happy to assist you. Alternatively, you can contact us directly through the Littlelf Smart App for immediate support. Our team is committed to ensuring a seamless setup experience and is here to help you every step of the way.